M-12
Clean Cell™
The
M-8 Is completely sealed to prevent any leakage
and is made with all high quality components
This Kit includes
1-
Sealed M-12 Cell
1-
water bottle with anti foaming filter and
welded fittings
1-
dryer bottle
1-
10 Oz bottle of KOH (should last 1-2years)
1-
stainless steel mounting bracket
1-
40 amp PWM with green amp gauge
1-40
amp circuit breaker
1-50
amp relay
Very
detailed instructions for a easy install
All of the hoses, clamps, connectors,
and wire you will need.
|
Specifications:
Cell size 6 X 5 X 2.5
Output 1-1.5 LPM at 15-20 amps
Maxium Peak Current draw is 30-35 amps
This
is a great little cell and at only 2.5" wide
will fit in front or the radiator of most cars and
trucks.
The
stainless mounting bracket will never rust and keeps
the cell quit small
The
unique filter in the water bottle prevents foaming
and helps the KOH last longer
Every M-12 Kit comes with the new
40 amp Constant Current PWM with amp gauge
Using
a PWM makes setup a brease
Just add KOH and set the PWM to the current you
want and that it
Using
a PWM will allow you to use a strong KOH level
and will prevent freezing down to -20 degrees
Since
the PWM is Constant Current
you will never have to adjust it unless you want
to
Single Kit
Complete
M-12
Clean Cell Kit
with 40 amp PWM
Only$479.95
With Free Shipping In The USA
|
Warranty
The
M-12 comes with a 1 year exchange warranty
This covers everything including the PWM
Do
not dissemble the cell or drill holes in it
Do not install near a heat source
Only use KOH and distilled water or
Warranty Is Void
|
Shipping
takes 3-5 days by UPS
